BS EN 1290-1998 Non-desturctive testing of welds-Magnetic particle testing of welds
|
ID： |
24238FCA22324F940034ACB96145A7F5 |
|
文件大小(MB)： |
0.35 |
|
页数： |
18 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1290:1998,Incorporating,Amendments,Nos.1 and 2,Non-destructive testing,of welds — Magnetic,particle testing of welds,The European Standard EN 1290:1998, with the incorporation of,amendments A1:2002 and A2:2003, has the status of a British Standard,ICS 25.160.40, , ,,,,, , ,Licensed Copy: na na, University of Central Lancashire JISC, Wed Oct 12 04:05:08 BST 2005, Uncontrolled Copy, (c) BSI,BS EN 1290:1998,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on 15 June 1998,. BSI 12 March 2004,ISBN 0 580 29630 X,National foreword,This British Standard is the English language version of EN 1290:1998,including amendments A1:2002 and A2:2003.,The start and finish of text introduced or altered by amendment is indicated in,the text by tags !". Tags indicating changes to CEN text carry the number,of the CEN amendment. For example, text altered by CEN amendment A1 is,indicated by !".,As agreed by CEN/TC 121/SC 5 resolution 134/2000 and in accordance with,amendment A1:2002, the term “examination” has been replaced by “testing”,throughout the document.,The UK participation in its preparation was entrusted to Technical Committee,WEE/46, Non-destructive examination, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 14, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Amendments issued since publication,Amd. No. Date Comments,13987 30 October 2002 See national foreword,14935 12 March 2004 Revision to foreword page and deletion,of Annex ZA,Licensed Copy: na na, University of Central Lancashire JISC, Wed Oct 12 04:05:08 BST 2005, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1290,February 1998,+ A1,May 2002,+ A2,December 2003,ICS 25.160.40,Descriptors: Welded joints, ferromagnetic materials, quality control, non-destructive tests, detection, weld defects,magnetic particle testing, surface treatment,English version,Non-destructive examination of welds —,Magnetic particle examination of welds,(includes amendments A1:2002 and A2:2003),Contr鬺e non destructif des assemblages soudés —,Contr鬺e par magnétoscopie des assemblages soudés,(inclut les amendements A1:2002 et A2:2003),Zerst鰎ungsfreie Prüfung von,Schwei遶erbindungen —,Magnetpulverprüfung von Schwei遶erbindungen,(enth鋖t 膎derungen A1:2002 und A2:2003),This European Standard was approved by CEN on 26 January 1998,amendment A1 was approved by CEN on 28 April 2002 and amendment A2 was,approved by CEN on 20 November 2003.,CEN members are bound to comply with the CEN/CENELEC Internal,Regulations which stipulate the conditions for giving this European Standard,the status of a national standard without any alteration. Up-to-date lists and,bibliographical references concerning such national standards may be obtained,on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the,responsibility of a CEN member into its own language and notified to the,Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium, Czech,Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland and United Kingdom.,CEN,……
……